User Tools

Site Tools


mp:post_caputured_errors

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
mp:post_caputured_errors [2024/04/25 19:12] – [STARTBIN ENDBIN error] russellmp:post_caputured_errors [2024/04/25 19:13] (current) – [PY] russell
Line 1: Line 1:
 +===== Errors in MP log file =====
 +
 +
 ====== PY ====== ====== PY ======
 ===== Tool Length Comp ===== ===== Tool Length Comp =====
Line 4: Line 7:
 >ERROR - TOOL LENGTH COMPENSATION NOT ENABLED DURING OPERATION MOTION >ERROR - TOOL LENGTH COMPENSATION NOT ENABLED DURING OPERATION MOTION
 Safety check to make sure tool length comp is on for tool.  Check to make sure ''tlenflg <> 0'' by looking at conditions in ''ptlen'', eg. ''axcomb'' needs to be correct in Mastercam for mill-turn. Safety check to make sure tool length comp is on for tool.  Check to make sure ''tlenflg <> 0'' by looking at conditions in ''ptlen'', eg. ''axcomb'' needs to be correct in Mastercam for mill-turn.
 +
 +===== ALL POSTS =====
 +
  
 ===== STARTBIN ENDBIN error ===== ===== STARTBIN ENDBIN error =====
mp/post_caputured_errors.1714072333.txt.gz · Last modified: 2024/04/25 19:12 by russell